OK, so the gorgeous yellow-orange Fairburn was the highlight of my rockhounding trip this weekend, but it certainly wasn’t the only “find”. Here’s a selection of some of the other agates, jaspers, etc. What amazes me about this location on the Buffalo Gap National Grasslands is the seeming infinite variety of what you can find, all within one very small area. All of these were collected within a one-square mile area.
Been stressful at work lately so I took off Friday and did something I’ve only done one other time this summer…head out to the Buffalo Gap National Grasslands and go rockhounding. It wasn’t the most pleasant of days! The forecast called for 75 and cloudy, but when I got about 60 miles away, the fog started getting thicker and thicker, and soon it was accompanied by a light drizzle. Much to my chagrin, things were exactly the same at my favorite rockhounding spot southwest of Kadoka. I ended up rockhounding from about 8 AM to 2 pm, and the temperature never got higher than 60, with the drizzle falling most of that time.
I found plenty of “good” material. As many prairie agates as I could want, as always. Bubblegum agates. Quartz. Petrified Wood. Jaspers. Adventurine. But the “prize” for people searching out there is a Fairburn agate. Since we started doing this last summer, we’ve probably been out there about 8 times, and have found a Fairburn about half the time, and that’s with a good, hard days’ search each time.
As the drizzle was just thick enough to make you a bit miserable Friday, I was contemplating leaving. But as I paused for a second to assess my situation, I saw a bright yellowish-orange stone ahead of me, one that really stood out from the others around it in terms of the color. Much to my delight, as I approached I saw some fine parallel banding…Fairburn! And a pretty good sized one, at over 2 inches in length. I did continue rockhounding for awhile before returning to the car and getting a good look at the banding.
A find that made a miserable weather day a whole lot brighter.
I’ve been on vacation for a couple of weeks, and have been playing catch up since getting back a week ago. Hence no blog posts for a few weeks. One advantage of being gone…my rock tumbler continued to carry on, and finished off a really beautiful batch that I’ve been working on the last 3 months. It’s one I’m particularly fond of, because every stone here is one that my son and I found on the Buffalo Gap National Grasslands here in South Dakota.
I guess I have a hard time classifying these, although most are prairie agates, with some bubblegum agates, jaspers, and quartz as well. Photos of the latest batch (click on the smaller ones at the end for a larger view).
There are two moments in polishing stones that are akin to Christmas morning for a kid. One is after the first rough polish. It’s at that stage where you get some wonderful hidden surprises, where the rough polishing has removed outer material and exposed some beautiful patterns underneath (happens a lot with bubblegum agates, for example). The second big moment is taking a batch out of the final polish. It’s a long process to polish rocks! I’ve learned patience, and it’s usually a two-month process to go from rough material, to a beautiful, shiny final product. Here are photos of the latest batch…my best yet, without question! A wonderful mix of agates, quartz, petrified wood, and jaspers. And the best aspect of this batch…EVERY piece was self-collected, on the Buffalo Gap National Grasslands here in South Dakota.
It’s been about 5 months since my son and I started rockhounding, and polishing some of our finds in a tumbler. It’s rather shocking how much material you can find on the South Dakota grasslands in just 5 months! I’ve got several large trays and buckets worth of agates, jaspers, petrified wood, fossils, and other goodies. Now the number one question I get from our other household member…”What are you going to do with all of those”?
It’s a DAMNED good question! I’ve already taken over our utility room (the room downstairs with the furnace and water heater). A big wire shelving system is chock full of rocks and supplies, and two tumblers have been going non-stop for the last 4 months. It’s such a long process to polish, that we don’t have a massive number of “final” pieces, but it’s a growing amount. Nearly all right now are either sitting on a shelf at work, or are sitting unseen in a tray in the utility room. Lately I’ve been looking at ways to display them.
I came across some images on Pinterest for displaying collections, including a guy who used “printer’s trays” to display his cork collections. I had never heard of a printer’s tray. They are large wooden trays with many small compartments, used by letterpress printers to hold the tools of their trade. Not knowing where the heck you could possible get such a thing, I looked on eBay and was surprised to see many available. One person was selling several quite cheap (only $22 each!), so bought a pair and thought I’d see what I can do with them.
They look wonderful! They’re old and have an antique look to them, but are in really excellent shape. I’m not quite sure how I’ll use them yet, in terms of whether I try to do some kind of refinishing on them, or leave them more as is. Stay tuned…within the next few weeks I hope to get a nice display set upon the walls of my home office!