Articles

Buying camera equipment? Cost concious? AVOID ABE’S OF “MAINE”

Canon 100-400mm L IS ii

My dream lens I tried to order from Abe’s of “Maine”. Note that not only is the same “Abe’s” of > 10 years ago (they went bankrupt), but the people who bought the company operate it out of New Jersey. They still retain the name “Abe’s of Maine” though…but that behavior is consistent with what’s evidently their entire business model, where all they do is lie and deceive.

I’ve been in a photographic funk. You can probably tell that by the lack of blog posts.  Part of the reason is the weather, as it’s been one hellaciously brutal winter. Not great for birds, or bird photography!  But part of it is that I just need something…new. Something to jump start the passion.

One thing we’re doing this summer will DEFINITELY jump start that passion…3 weeks in Australia!  We’re flying into Sydney and spending time there, but also have time near Coffs Harbor, Brisbane, and Port Douglas. The last is the most exciting to me, as we’ll be adjacent to both the Great Barrier Reef, and Daintree Forest, the only place on the planet where two World Heritage sites are adjacent to each other!  It’s going to be the trip of a lifetime for our little family who hasn’t been outside of the US, other than Canada. And from a birding standpoint, it should be spectacular.

To prepare for that trip, I wanted to get a new lens. Literally 99% of all photos of my website have been taken with the same lens…a Canon 400mm 5.6L.  It’s a wonderfully sharp lens! I’ve had it over 15 years and it’s served me VERY well.  But it has limitations. As a prime, I miss out on other wildlife situations when I’m out shooting, as it’s too long sometimes for bigger critters.  It also is one of the older Canon “L” professional lenses, and lacks Image Stabilization. For a relatively slow 5.6L max aperature and a lack of IS, you really need good light to have a great shot at sharp photos.

Before heading to Australia, I thus wanted to buy a Canon 100-400mm L IS ii lens. The 2nd version of this lens gets truly incredibly reviews, and with the broad zoom range and a wonderfully reviewed IS, it meets my needs. It’s a lot for me to spend though, with most places charging $2049. I was thus really excited when I saw one place offering it for an amazing $600 less than that!  I knew it was likely ‘grey market’ (imported directly, not eligible for a Canon warranty), but at that price, it would have been worth it.

The seller was Abe’s of Maine. I’d never used them, but I’d heard of them over the years. Note though it’s been many years since I’ve bought new equipment, so I didn’t know that in the last decade they’ve 1) gone bankrupt, and 2) had a new owner operate the name out of New Jersey. A new owner with a truly god-awful reputation.

I can attest that reputation is WELL deserved!  After I excitedly placed the order Sunday, today (Monday) I started getting phone calls and emails. “Ted” from Abe’s left a message, stating that he needed to confirm my order.  When I had time, I called. At first he was nice. At first. That didn’t last long. He asked about my equipment, then explained that the lens I ordered wasn’t the “retail version”, and didn’t include:

  1. Lens caps (!!!)
  2. Hood
  3. Case
  4. Tripod foot/shoe
  5. Tripod Collar

The last one was REALLY a shocker to me, because on this lens…THE TRIPOD COLLAR IS INTEGRATED INTO THE LENS AND ISN’T REMOVABLE!!! I audibly LAUGHED when he told me the last one and called BS on him.  He got very defensive and assured me that all of these items simply aren’t included with the lens, but for $1999 (A mere $550 above the website price!!) he could give me the lens with these “extras”.

Again, I called BS on him and asked if he was going to honor the offer online. He started going off again about the “retail” version, and I said CANCEL MY ORDER!! and hung up on good ol’ Ted.

And immediately I got a call (which I didn’t answer). Then another.  Then two emails.  In one email he said I hung up too early, and that he thinks he could offer the “retail version” for $1799.  There was NO way I was going to deal with this company after the bait-and-switch, so I emailed back three simple words.  CANCEL MY ORDER.  A little later I got another email. No, the order hadn’t been cancelled yet!  No, now suddenly he could offer it at $1699.  So again, I replied, this time stating CANCEL…THE DAMN…ORDER.

Awhile later, I did finally get an email that they cancelled the order. But this whole episode went on for the better part of a day. After that first call, I started reading the horror stories about Abe’s. One “feature” of their business is that they evidently often charge a 15% “restocking fee”, and not only for returned items, but sometimes for items that were cancelled before shipping!! When I read that, somewhere in between his 4th and 5th attempt to call me and his 4th email attempt, I called my credit card company and CANCELLED that card, ordering a new one. I was NOT going to give this crappy company a chance to charge ANY sort of fee, particularly not this bogus restocking fee.

I’m 52 years old. I should have known it was too good to be true, but I couldn’t resist that price. There are PLENTY of bad reviews for the “new” Abe’s…take them to heart. Also note they clearly spam the review sites with their own, perfect reviews…don’t believe it.  As one reviewer noted, Abe’s is the ONLY place he knows of where “if you buy a TV, they’ll charge you, then call you back and ask if you want to pay extra for the remote“.

Here’s another warning:

https://www.cpricewatch.com/blog/2014/05/warning-avoid-abes-of-maine-and-other-bait-switch-retailers/#comment-36400

 

 

Beauty in Small Packages

Three months. I’m learning the value of patience with my new rockhounding and tumbling hobby, as I’ve learned the stones I tumble (South Dakota agates) are very hard, and need to be tumbled for a long time to get a good polish. I’ve learned that the process thus takes about 3 months!  I was doing one week for each of the four tumbling steps I do, but wasn’t getting great results until I upped that to three weeks for each step.

I’m pretty thrilled with this latest batch!  I would say this is my first real, high-quality batch that I’ve done.  These are from my small tumbler, and thus, most of these stones are only 1″ to 1 1/2″ inches in length. They’re beautiful even to the naked eye, but I’m finding that the use of my macro lens and a close photo really allows me to see the beauty and detail in these stones.  Here’s a (large!) number of photos of various agates and jaspers from my latest batch.

Bubblegum Agate

This agate had the typical, bumpy, bubbly shape of a bubblegum agate, but when I found it on the Buffalo Gap National Grasslands, it was a dull grayish-black. It took the better part of 4 months worth of tumbling to wear down the outer layer, exposing some of the most beautiful patterns I’ve seen on any of my agates.

South Dakota Agate

I’m calling this one “Crystal Dragon”. Not sure whether you’d call this a prairie, bubblegum, or other agate, but I love the swirling pattern, with the crystal/druzy “neck” on the dragon, and a little pink tongue and eye.

Prairie Agate

A prairie agate, showing a beautiful array of colors. A lot of the more weathered agates on the grasslands have black parts on their exterior. I believe that’s manganese oxide that forms when they’re exposed to the elements (at least some of the blacker agates). Much of the time that black disappears when you tumble, but on this prairie agate, the black was maintained in some of the bands.

South Dakota Agate

Wonderful fine detail that’s not all that noticeable to the naked eye, but is quite evident in a macro photo of this agate.

Prairie Agate

A lot of the bubblegum and prairie agates you find have a very subtle, very fine banding such as this. Very often it’s not noticeable until you tumble.

Bubblegum Agate

A classic bubblegum agate, a little larger than many of the agates on this page. Bubblegum agates really tumble beautifully, as you generally get these beautiful agate “eyes”.

Prairie Agate

Interesting shape on this agate, with a little peak that has it’s own little cap/color pattern.

Prairie Agate

A prairie agate, with a lot of “druzy” (crystally) elements.

Prairie Agate

The biggest agate in this batch is also one of the most gorgeous. This beautiful Prairie Agate has some wonderful banding patterns, and a beautiful range of colors.

Bubblegum agate

Another bubblegum agate with the typical eyes you see when polishing.

South Dakota Agate

I’m not sure what to call this one (help!!). It has a definite linear “grain” pattern, but it’s so unlike all the petrified wood I’ve found that I hesitate to call it that.

Prairie Agate

I love the pattern on this one, with the bold orange streak.

South Dakota Jasper

Jasper? Agate? I dunno. Has a pretty pattern though!

Prairie Agate

The most common prairie agate patterns are jagged, rough striping, but this is also a relatively common type of pattern and color for prairie agates from Buffalo Gap.

Bubblegum Agate

Another polished bubblegum agate

Prairie Agate

A prairie agate with some nice banded patterns

Prairie Agate

I love the contrasting patterns on some of the agates, with very dark sections contrasted by white or very light sections.

Bubblegum Agate

Another bubblegum agate, one that was tumbled awhile and didn’t maintain the “eyes” as much as some of the others.

Saving $500 – a DIY macro flash diffuser

Mayfly photo - macro photography by Terry Sohl

Mayfly, taken with my do-it-yourself macro flash unit. This was taken well after sunset, with the modified flash unit providing all lighting.

I’m now about 3 weeks into the macro world.  One thing that became obvious pretty quickly is that with such a short focusing distance (often about 1 foot from the subject), controlling light can be a lot tougher with macro.  Flash is an obvious way to control the light for a shot, but the “standard” flash units for DSLR’s generally aren’t good for macro, at least not with the flash right on the hot shoe of the camera.  For example, I have Canon’s “Speedlight” 430 EXII, a very nice flash unit.  But when it’s on the camera itself, there’s no way to direct the flash to such a short focusing distance.

You can buy a cord and take the flash off the camera itself, but to me it’s a little unwieldy to try to manage an off-camera flash and the camera itself.  Canon does make a specific flash for macro.  It’s a ring-flash, a round flash that goes right on the end of your lens.  It’s a nice solution!  It’s also $500!! Given that I’m still new to macro, I didn’t want to spend that much on a dedicated macro flash, so started looking around on the web and saw people have made all kinds of do-it-yourself flash setups for macro.

Better Beamer Photo

The basic Better Beamer setup, a simple pair of frame pieces and a Fresnel lens that attach to your flash with Velcro. I used the frame pieces of one as the basis for my modified macro flash.

It’s the opposite problem of when I shoot birds, and when I want to “extend” my flash a longer distance.  For birds, I have a “Better Beamer”, a simple yet very effective attachment to the flash that uses a Fresnel lens to focus light from the flash for a longer distance shot.  I actually had an extra bracket pair for my flash, so started wondering if I could use a modified Better Beamer setup for macro flash.

The idea…I just wanted something that could redirect the flash output.  The minimum focusing distance on my Canon 100mm 2.8L IS macro lens is a about a foot, so ideally I wanted something that would direct the light towards a very close object, but could also be used for a little bit longer distances (say 1 to 3 feet) that you might use for larger macro subjects like butterflies.  With a little aluminum foil, tape, and foam core board, I ended up making a surprisingly effective and easy to use macro flash setup.

Do-it-yourself macro flash

This is the basic modified Better Beamer components. The top is enclosed with foil-covered foam core. Another foil-covered foam core piece is positioned within the frame, directing the flash downward. The Better Beamer itself is also foil covered on the inside (OK, and outside because it was easier!) to better reflect the light from the flash.

I started with the Better Beamer frame pieces themselves.  They attach to the flash unit with Velcro, so it’s very easy to add or remove the Better Beamer setup.  What I needed was to direct the flash downward, towards a distance of about 1 foot from the lens.  I started by cutting a piece of foam core to fit exactly on the top of the flash unit, between the Better Beamer frame, and layered it with with aluminum foil.  This basically encloses the top of the ad-hoc macro flash unit.  With the top enclosed, I then wanted another foil-covered foam-core piece to fit within the frame, but at an angle that would direct the flash downward towards a subject about a foot away from the camera lens.  With the modified Better Beamer on the flash unit, and with the flash on the camera, I calculated a rough angle the piece would have to be at inside the frame, cut a foam core piece to fit, covered it with foil, and put it in place.  I also covered the Better Beamer frame itself with foil.  With this simple setup, the “normal” flash goes into the semi-enclosed unit, and is deflected downwards towards a close subject.

After trying it out, I was thrilled with the results!  For macro shooting in natural light, you often need a well-lit, bright subject or you won’t have enough shutter speed to get a sharp photo.  With the flash, I can make the flash the primary source of light, and given the very short burst of light from a Canon Speedlight, shutter speed itself isn’t as important and you can “stop the action” and get a crisp shot fairly easily.  With the flash set in the 90-degree position, with the flash pointing straightforward, the angle inside is perfect for bouncing flash towards a subject close to minimum focusing distance.  For a bit of a longer distance shot, the angle deflects the light downward too quickly, but with the 430EX flash, you can tilt the flash unit upward.  It’s thus very simple to use for a range of macro distances.  While the initial shots were very well lit and sharp, I made one more modification to diffuse the light from the flash.  With the simple bounce set-up, with the flash light deflected off the aluminum foil, the shots were well lit, but sometimes a bit contrasty and harsh.  I wanted a simple diffuser to soften the light, so just took a piece of thin white cloth and stretched it across the bottom of the modified flash setup.  It worked wonderfully to avoid the harshness of the un-diffused flash.

DIY Macro Flash Diffuser

The final piece of the puzzle, a bit of white cloth stretched across the bottom of the unit. The flash must pass through the cloth, diffusing the light and providing a more pleasing image.

Very simple, took me perhaps an hour to put together, and it saved me $500!  No, it’s not as elegant as Canon’s ring flash.  In fact, it’s definitely the ugliest piece of camera equipment I now have!  But it’s worked wonderfully, as I get to keep the wonderful ETTL (electronic “through-the-lens”) flash metering of my 430 EXII, and with the Better Beamer frame as the base, the modified flash components are easily removed when I’m not shooting macro.

I do suspect that if I keep up my interest in macro, that I will give in and get the ring flash unit some day.  But for now, my DIY macro flash diffuser is working quite well.

Macro Quiz #1 – What am I?

Macro Quiz #1 - What am I?

What am I? Think small!  Click on the image if you want a closer view.

I haven’t posted in a few days as I’ve been struggling with a dry eye thing (I have Sjogren’s Syndrome, of which dry eye is one “feature”).  Makes it awfully hard to go out and shoot photos, given how blurry my vision can be, especially as the day goes on.  No photography, and I lose my motivation to post much on the blog. I’m starting to feel better, and hopefully it keeps trending this way, given that symptoms seem to wax and wane.

I did get out and shoot some this weekend.  Again, I’m playing with the new macro lens (Canon 100mm 2.8L IS). Hey, what can I say!!  I’ve got photos now of practically every bird I’m likely to see in South Dakota, and I admit it’s hard to get excited to shoot photos of a species for the 161st and 162nd time!  The macro thing came along at a good moment, as I can still go out and go birding, still get out and walk and enjoy nature, yet have new and exciting subjects.  I’m still mostly shooting insects, but when you start thinking “small”, there are SO many other things you can shoot.  Seeing and shooting patterns in the macro world is almost as fun as shooting lil’ critters.

With my entry into the macro world, I thought I’d start a new blog category…macro quizzes!  Challenge number 1…what is this a photo of?  At first glance to me, it could be siding on a house, but….we’re talking macro!  Think small!

A macro kind-o-day

A hover fly on a thistle bloom.  These guys aren't very big, but it gives you a good idea of the kind of image you can get with just the "base" Canon 100mm 2.8L IS lens, with no additional extension tubes, teleconverters, or close-up filters.  A real joy of a lens to use!

A hover fly on a thistle bloom. These guys aren’t very big, but it gives you a good idea of the kind of image you can get with just the “base” Canon 100mm 2.8L IS lens, with no additional extension tubes, teleconverters, or close-up filters. A real joy of a lens to use!

Alright this is too fun.  As I often do, I slipped out of the house very early Sunday morning to get a little birding in.  The plan was just to stay in the local area, hoping to find some migrating shorebirds.  I headed west of Sioux Falls, and while there were shorebirds scattered around in various locations, I wasn’t having a speck of luck in terms of photographing them.

Macro to the rescue!  Not wanting to come home empty handed of photos, I spent an hour or so photographing little critters.  While birds may or may not be cooperative, depending upon the day, I’m quickly finding that it’s pretty easy to find a willing subject shooting insects with my macro lens.  About 5 minutes after I decided to try to shoot macro, I came across a patch of purple flowers (aster(?), along with some scattered thistle and clover) growing along the side of the road.  I pulled over and ended up spending most of the next hour sitting along the side of the road by one small patch of flowers.

Consperse Stink Bug

A (Consperse?) Stink bug on a thistle bloom. A week ago, before getting the new macro lens, I never would have imagined I’d be out on the internet, trying to identify the exact species of stink bug I was seeing!

Given that I’m still new to shooting buggies, I’m sure I’ll adapt in terms of the kinds of areas I choose to shoot, but for now as I’m learning, it’s hard to beat a nice patch of flowers.  There are of course all the different pollinators, and I’m also quickly learning just what a variety of pollinators there are! I’m having a hard time putting a name to a lot of them at this stage, other than “honeybee”, “bumblebee”, or…”buggy-like thing”.  The diversity, color, and beauty of these little critters is certainly blowing me away though.

It’s not just pollinators I’m trying to shoot.  I’ll gladly take any willing subject that crosses my path.  This same flower patch also was chock-full of very young grasshoppers, of at least 2 or 3 different species.  Milkweed bugs were around, as were a few other beetles, stinkbugs, ants, and others.  A cornucopia of photography subjects!  And for the most part, such willing subjects compared to birds!

What started out as a birding and bird photo day, saved by macro buggies!  Click on the images for larger views.

BeetleGrasshopperDifferential GrasshopperHoneybeeMilkweed BugEastern Forktail

New Toy! And a new brand of my hobby?

Blowfly and flower

Literally one of the first few photos I took with the new lens. WHAT A LENS. The sharpness is wonderful, and I was thrilled beyond belief to be able to get such a “close” photo my first time out with it.

I have a Canon 70-200mm 4.0L lens that I’ve had for probably 10 years.  It’s an awesome lens, extremely sharp, particularly given that zooms typically aren’t as sharp as prime lenses.  The problem is that I never use it!  Well, rarely ever.  Given that I mostly shoot birds, I nearly always have my 400mm lens on the camera.  On the rare occasion I shoot landscapes (or people!), the 70-200 is too long, so I typically have on my wide angle.  The 70-200 thus only really gets used on rare occasions that I should large animals other than birds, like when we go to Yellowstone.

Well, we live 14 hours away from Yellowstone, and while we have been there a few times in recent years, it’s not exactly an every day occasion!  The lens may be 3 years between being used!  I had always wanted to try macro shooting, so finally wised up, put the 70-200mm out on eBay, and bought a Canon 100mm 2.8L IS macro lens.  I had dreams of getting some wonderful insect photos like I’ve seen other people shoot with macro!  Given what my first bird photos looked like when I started 15 years ago though, I expected there to be a very steep learning curve.  I expected my initial images to look, well…pretty bad, until I got used to the new lens and learned how to use it.

Bumblebee on bloom

A bumblebee on a flower. This isn’t even close to as close as I could have been, but I didn’t want to get too close shooting this guy. To give you some idea of the capabilities of this lens, later I tried a little sweat bee, and was able to use the lens to get close enough to have a sweat bee fill a big chunk of the frame. I didn’t expect to be able to get such small bugs in such detail.

The lens came today, and I went out in the back yard in search of insects to try it on.  All I have to say about this lens is…HOLY CRAP!  For someone that has never shot macro, the capabilities of this lens have blown me away on day one!  It has a reputation of being one of the sharpest lenses Canon offers, and I certainly have no complaints after my first photos with it.  I knew the lens was a “true” macro lens, capable of 1:1 photos (capturing a real-life object at the same size on the image sensor), but WOW, I didn’t expect to be able to get such great, close, detailed photos of small insects, without the use of extension tubes, close-up lenses, or other attachments people often use for macro.

I’m not a “buggy” person, in that I do NOT like insects or spiders in my house!  But tonight I was in hot pursuit of whatever I could find.  I ended up just sitting in the grass next to a flower bed, and trying to shoot what came by.  I’m pretty sure the species of fly shown here is some kind of blowfly?  Shooting like this sure opens up a new world.  Bugs may be “icky” to many (including me most of the time!), but I was kind of blown away by the subtle beauty and detail that I was able to get with this lens.

I already have WAY too many hobbies.  I fear that after today, macro photography may join bird photography as a hobby.  The nice thing about it…at least outside of winter, you’re ALWAYS going to have some creepy-crawlies right in your own yard that you can shoot!  I’m really looking forward to more use of this lens, and seeing what it can do.

%d bloggers like this: